Medical Compressor Nebulizer

Description:

The nebulizer is used to atomize the chemical liquid in the atomization cup after filtering the compressed gas generated by the gas compressor. The respiratory system is an open system. After the medicinal solution is atomized into fine particles for inhalation by the patient, the medicinal mist can be directly adsorbed on the patient's mouth, throat, trachea, bronchus, alveoli, etc., and absorbed through its mucosa to achieve the purpose of treatment. 

1. Stable structure, suitable for hospitals, clinics, offices, homes, sports venues, etc .;

2.Roller high-performance piston, stable pressure and flow, 3000 hours working life;

3. Operating noise <57dB;

4. Continuous treatment time> 8 hours.

Picture images:

working principle：

The air compression atomizer uses a small air compressor as the atomizing power. The atomization of the medicinal solution through the special atomizing position belongs to the atomization of the original liquid, which will not waste the medicinal solution and will better absorb it in the pharmacy.

Atomized particles:

Generally, mist particles with a diameter of 1-5 microns are atomized, so that particles of this size can enter the lower respiratory tract and capillaries. Better and faster treatment results.

Noise:

Air compression atomizers generally have a relatively large amount of noise, which is about 50-60 decibels. Because the air compressor works, it requires relatively large power and power, so that the atomized liquid medicine particles can be made smaller.

FAQ

Our Factory    

Our Strengths
R&D: Development and production of high quality and high value medical dressings and nonwoven products
Our factory: the production base covers an area of more than 50,000 square meters, with ISO8 clean plant and more than 4,000 meters of ethylene oxide sterilization center
Our equipment: focus on scientific and technological innovation, the introduction of international advanced production equipment and technology
Our qualification: Strict quality control, obtained ISO13485 and CE certificate.

Our service
1. Accept orders no matter how big or small they are.
2. Provide FOB, CFR, CIF, EXW terms.
3. Accept T/T, L/C, D/P.
4. Provide free samples.
5. Provide OEM customized service with more choices of materials, patterns, sizes and packaging to satisfy your personalized needs.
6. Our factory, perfect management system, high quality and favorable price.
7. Fast delivery, standardized and efficient production.
8. Good after-sales service, you have any problems quickly dealt with.