Latex gloves are one kind of gloves, which are different from general gloves and are processed from latex. It can be used as a household, industrial, medical, beauty and other industries, and is a necessary hand protection. The latex gloves made of natural latex, processed with other fine additives, have a special surface treatment and are comfortable to wear, and are widely used in industrial and agricultural production, medical care, and daily life. So what experiments do latex gloves need to do in the production process?

The products of rubber have excellent oil resistance, high abrasion resistance and good heat resistance. They are made of high quality rubber with other additives and refined processing; they do not contain protein, are strong and durable, and have good adhesion. Gloves are widely used in domestic work, electronics, chemicals, aquaculture, glass, food and other protection, hospitals, scientific research and other industries use.

Glove test purpose:
Is not rupture in the process of propping or use, gloves must have sufficient elastic properties, the stress suffered such as hook force, fingertip force, the force exerted by sharp tools, foreign objects or gloves to operate the equipment. The glove test is used to ensure the specified use reliability of the method includes the following mechanical tests, tear strength tests on gloves with seams or seamless, including artificially aged gloves, tested in accordance with ISO 37, three test round rods with shoulders through the palm of the specimen glove, back and at the wrist guard, parallel to the longitudinal direction, should avoid structural areas.

Latex glove tensile testing machine operation steps:
1, enter the parameters of the test specimen, in setting parameters are divided into 2 parts, specimen parameters and preset parameters and results, for the specimen parameters of this part of knowledge for the spiral spring and set, when the specimen for the disc spring, plate spring, these parameters can not fill in, do not fill in the parameters of the statement is not printed.
2、After the parameters are set, the specimen is placed in the center of the fixture.
3, set the test parameters, the test speed should not be too large, otherwise the test results are not accurate.
4、Start the test when it is ready. Tap the button to start the test, and the test will end automatically when it is completed, or you can tap the test introduction button to end the test during the test.