1. Isolation clothing

Wear a gown:

(1) The right hand collar, the left hand into the sleeve, the right hand pulls the collar up to reveal the left hand.

(2) Change the left hand collar, the right hand into the sleeve, reveal the right hand, raise your hands and shake the sleeves, be careful not to touch the face.

(3) Two hand-held collars, with the neckband extending backwards from the center of the collar to the back.

(4) Pull the isolation garment on one side (about 5 cm below the waist) and see the edge pinch. The same method is used to pinch the other side edge.

(5) Align the sides of the clothes with your hands behind.

(6) Fold to one side, hold the fold with one hand, and pull the belt to the back fold with the other hand.

(7) Cross the belt at the back and return to the front to tie the belt.

Detachment method:

(1) Untie the belt and hit a knot in front.

(2) Disinfect the hands.

(3) Untie the back of the neck.

(4) The double-hand strap pulls the gown from the chest.

(5) Hold the left collar on the inside of the left collar and remove the left sleeve.

(6) Hold the right side of the collar on the right side and pull off the right sleeve. The coat will be contaminated and the collar and the side of the garment will be rolled to the center and placed in the designated container.

2. Protective clothing

Wear protective clothing: joint or split protective clothing, should follow the first coat, then the top, then put on the hat, and finally pull the zip lock order.

Take off protective clothing method:

(1) Split protective clothing:

   1) Pull the zipper away first.

   2) Lift the hat up and remove the head from the hat.

   3) Remove the sleeves and take off the contaminated surface and put them into the designated container.

   4) The undercoat is contaminated from the top to the bottom, and is taken off into the designated container.

(2) Siamese protective clothing

   1) Pull the zipper to the end first.

   2) Lift the hat up and remove the head from the hat.

   3) Take off the sleeves and take off the side of the pollution from the top to the bottom.

   4) Put it off and put it in the designated container.

3. Surgical gown

Wearing a surgical gown method:

(1) Take out a piece of sterile surgical gown from the opened sterile bag, look for the collar, lift the two corners of the collar with both hands, and shake the room in a more spacious place (with a barrier of 1.5 meters in front). Open the surgical gown and take care not to point the outside of the surgical gown to yourself.

(2) Put the surgical gown away from the air and insert your hands into the sleeve quickly.

(3) The two arms are lifted straight forward, and the patrolling nurse assists the slings in the back and fastens them, and the hands reach out of the cuffs.

(4) The body leans forward, lifts the belt, hands crossed, and the patrolling nurse takes the belt behind the back and fastens it.

Undressing method

(1) After the aseptic operation is completed, if another operation is needed, such as the glove is not broken, you do not need to brush your hands again. You only need to soak the alcohol or benzalkonium bromide solution for 5 minutes. Apply your hands and forearms, then wear sterile surgical gowns and gloves.

(2) If the previous operation is a contaminated operation, the hands should be washed again before surgery, and then sterile surgical gowns and gloves are worn.

(3) Only one operation can be assisted by the visiting nurse to untie the belt and remove the surgical gown and gloves.

Contact us: sales@hnmedtech.com