In order to achieve the standardization and standardization of surgical care coordination, taking gastrectomy as an example , the standard of surgical instruments and supplies table setting was developed to regulate the table setting operation of the surgical sterile table:
01、Set up two instrument tables, place the main instrument table at the same level with the anesthesia head frame, and spread the middle sheet in front of the anesthesia head frame to enlarge the sterile area; the auxiliary instrument table is placed at the end of the surgical bed on the left side, parallel to the main instrument table, and the spare lumenscope instruments and boxes are placed on the auxiliary instrument table to keep the instruments on the table sterile, and to avoid touching and contamination.
02, ultrasonic knife is placed at the center of the end of the surgical bed, keeping a certain distance from the position of the end of the bed supporting mirror assistant. The suction device, electrosurgical knife and pneumoperitoneum are placed on the right side of the surgical bed, and another set of suction device is placed at the head of the surgical bed.
03. Instrumentation table: The left half of the main instrument table is left with space for the luminal Conkey forceps and purple Hem_o_lok forceps to be placed vertically with good clips, which is convenient for President Shi to operate and put them in the operation; the upper left corner of the instrument table is placed with a double-folded open towel, and a long wet strip is placed on the double-folded open towel, which is convenient for the ultrasonic scalpel tip to be wiped during the operation; the center of the instrument table is placed with the rinsing bowl and curved tray, and the right side of the instrument table is placed with open The right side of the instrument table holds open surgical instruments and dressings. The right side of the instrument table holds open surgical instruments and dressings. The auxiliary instrument table is used to hold infrequently used spare instruments, and the ends of the instrument cases should not extend beyond the edge of the auxiliary instrument table.